Description
HST110 Replaces:
ST1072 UST1102 |
EST1072 UST1102 |
C1099 C1318 |
Features:
- Premium Sealed 203 Bearings Both Ends
- Open & Accessible Terminal Board & Wiring Compartment For Easy Installation
- New Triple Seal Protection on Pump-End Bearing
- Voltage Change Device
- Definitive Shaft Access (7/16" Wrench)
- UL 1081 Design
- 50°C Ambient
- 303 Stainless Steel Shaft
- Centurion PRO
General Specifications
UPC: | 786674069795 | Weight: | 21.00 LB |
Packaged Length: | 15.98 IN | Packaged Width: | 9.13 IN |
Packaged Height: | 9.02 IN |
Nameplate Specifications
Output HP: | 1.10 Hp | Output KW: | 0.82 kW |
Frequency: | 60 Hz | Voltage: | 230/115 V |
Current: | 6.8/13.6 A | Speed: | 3450 rpm |
Service Factor: | 1 | Phase: | 1 |
Duty: | Continuous | Insulation Class: | F |
Frame: | 56J | Enclosure: | Open Drip Proof |
Thermal Protection: | Automatic | Ambient Temperature: | 50 °C |
UL: | Recognized | CSA: | Y |
Technical Specifications
Electrical Type: | Capacitor Start Induction Run | Poles: | 2 |
Rotation: | Counterclockwise Pump End | Mounting: | Round |
Motor Orientation: | Horizontal | Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball | Frame Material: | Rolled Steel |
Shaft Type: | Threaded | Overall Length: | 13.28 in |
Frame Length: | 7.25 in | Shaft Diameter: | 0.625 in |
Shaft Extension: | 2.562 in |